daniel-koponyas-9MKEpRaAt6Y-unsplash.jpg

PLASTIC MATERIALS

Get an overview of our engineering plastics and high-performance plastics from the PLASTMASS ™ brand. The Plastmass Group manufactures plastic products from standard, high-performance and technical plastics under high quality standards (ISO 9001: 2015). For the production of our compounds, plastic semi-finished products and plastic finished parts, we only use high-quality and new raw materials from well-known suppliers. The materials listed below are available from us in the form of rods, plates and tubes. For this we use processes such as extrusion, pressing, calendering and casting, depending on the semi-finished plastic product. We also manufacture finished parts from our materials for you. These are made by machining or injection molding. In order to provide you with particularly low-tension semi-finished plastic products our semi-finished plastic products are tempered.

Basic Materials

Material

Type

Group

Temperature range

Polyethylene / HMWPE

Commodity plastic

–200 °C to 100 °C

Polyethylene / UHMWPE

Commodity plastic

200 °C to 80 °C

Polyethylene / UHMWPE

Commodity plastic

–180 °C to 80 °C

Polypropylene Copolymer

Commodity plastic

up to 110 °C

Polyoxymethylene

Engineering plastic

–60 °C to 100 °C

Polyetheretherketone

High performance plastic

–60 °C to 250 °C

Polyethylene terephthalate

Engineering plastic

–100 °C to 110 °C

Polyphenylene sulfide

High performance plastic

–100 °C to 240 °C

Polyetherimide

High performance plastic

–70 °C to 180 °C

Polyurethane

Commodity plastic

–50 °C to 80 °C

Modified Materials

Material

Type

Group

Temperature range

PEEK with high elasticity

High performance plastic

–100 °C to 250 °C

PEEK modified with PTFE

High performance plastic

–50 °C to 250 °C

Fortified PEEK

High performance plastic

–200 °C to 250 °C

PEEK with PTFE, graphite and carbon fibre

High performance plastic

–50 °C to 250 °C

PEEK 30% glass fibre reinforced

High performance plastic

–60 °C to 310 °C

PEEK 30% carbon fibre reinforced

High performance plastic

–60 °C to 340 °C

Mineral-reinforced PET

Engineering plastic

–40 °C to 80 °C

Elastomer-modified PET

Engineering plastic

–50 °C to 55 °C

Elastomer-modified PET

Engineering plastic

–50 °C to 55 °C

Antistatic Polyethylene / HMWPE

Commodity plastic

200 °C to 100 °C

Sliding Polyethylene / UHMWPE

Commodity plastic

–180 °C to 80 °C

Self-lubricating Polyethylene / UHMWPE

Commodity plastic

–180 °C to 80 °C

High wear resistance Polyethylene / UHMWPE

Commodity plastic

–180 °C to 80 °C

Low friction Polyethylene / UHMWPE

Commodity plastic

–180 °C to 80 °C

Acoustic insulating Polyethylene / UHMWPE

Commodity plastic

–180 °C to 80 °C

Reinforced with carbon fiber

High performance plastic

–50 °C bis 240 °C

Elastomer-modified PPS

High performance plastic

–100 °C bis 220 °C

Reinforced with carbon fiber and PTFE

High performance plastic

–100 °C bis 240 °C