Background

PLASTMASS™
PEEK PLASTIC

PEEK Plastic Rod

PEEK Rods

DIAMETER min. 6 mm

DIAMETER max. 210 mm

LENGTH 1000 - 3000 mm

PEEK Plastic Tube

PEEK Tubes

OUTER DIAMETER min. 30 mm

OUTER DIAMETER max. 385 mm

LENGTH 1000 - 3000 mm

PEEK Plastic Sheet

PEEK Sheets

THICKNESS 10 - 60 mm

WITDH 1000 - 1250 mm

LENGTH 1000 - 4000 mm

AVAILABLE COLORS 

Natural and Black

PEEK Properties

PLASTMASS™ PEEK (polyetheretherketone) is ideal for applications with high performance requirements. Our PEEK high performance plastic is designed for plastic parts that are exposed to temperatures above 250 ° C and pressures up to 15 MPa. PLASTMASS™ PEEK plastic is very resistant to most organic and inorganic chemical substances.

  • Operating temperature
    -65 °C to 250 °C (260 °C)

     

  • Tensile modulus
    4000 MPa

     

  • Flexural modulus
    3800 MPa

     

  • Compressive strength
    125 MPa

     

  • Tensile strength
    98 MPa

     

  • Flexural strength
    165 MPa

PEEK Characteristics

  • High fatigue strength

  • High tensile strength

  • High hydrolysis resistance

  • High dimensional stability

  • High chemical resistance

  • High resistance to frictional wear

  • High yield strength at high temperatures

  • PTFE and silicone free

  • Resistant to weather influences

  • Corrosion Resistant

PEEK Modifications

Our modified PEEK plastic material is characterized by a higher mechanical strength, hardness and creep resistance than regular peek. The reinforced PEEK thermoplastics are not affected by linear expansion and is able to absorb vibrations and shocks.

  • PEEK V1T
    High elastic recovery and high elasticity

     

  • PEEK V2T
    Modified with PTFE

     

  • PEEK V11T
    Fortified material

     

  • PEEK VMT
    Fibre-reinforced with PTFE

     

  • PEEK GF30
    30% glass fibre reinforced

     

  • PEEK UF30
    30% carbon fibre reinforced