Background

PLASTMASS™
PET PLASTIC

PET Plastic Rod

PET Rods

DIAMETER min. 6 mm

DIAMETER max. 210 mm

LENGTH 1000 - 3000 mm

PET Plastic Tube

PET Tubes

OUTER DIAMETER min. 30 mm

OUTER DIAMETER max. 385 mm

LENGTH 1000 - 3000 mm

PET Plastic Sheet

 PET Sheets 

THICKNESS 2 - 114 mm

WITDH 1000 - 2000 mm

LENGTH 1000 - 4000 mm

AVAILABLE COLORS 

Natural

PET Properties

PLASTMASS™ PET (Polyethylene Terephthalate) is characterized by its hardness, long service life and excellent sliding behavior. It is particularly suitable for bushings and sliding parts that are used for dry operations. Due to its low moisture absorption, it is used for applications in damp and dry environments.

  • Operating temperature
    -100 °C to 110 °C (140 °C)

     

  • Tensile modulus
    2900 MPa

     

  • Flexural modulus
    3300 MPa

     

  • Tensile strength
    78 MPa

     

  • Compressive strength
    75 MPa

PET Characteristics

  • High reliability through durability

  • High fatigue limit

  • High chemical resistance

  • High weather resistance

  • Resistant to oils, coolants and fuel

  • Resistant to weak acids

  • PTFE and silicone free

  • Corrosion Resistant

  • Low wear

PET Modifications

PLASTMASS™ PET plastic modifications are made for special application areas and industries. Our modified PET (Polyethylene Terephthalate) polymers are characterized by their high elasticity, impact resistance, abrasion resistance, tensile strength and burst strength in a wide temperature range. 

  • PET MT
    Mineral-reinforced
     

  • PET EL 55
    Elastomer-modified

     

  • PET EL63
    Elastomer-modified