top of page
Background

FLUOROPLASTIC

Replacement of fluoroplastic with PLASTMASS material based on PET, PPS, PEEK, PEI, etc. from the manufacturer

zedex-100K-модификации-scaled.jpg
PET-Parts-Compilation-1.jpg
DSC01185.jpg
DSC01185.jpg
zedex-100K-модификации-scaled.jpg

Options for replacing fluoroplastic

Material

Type

Group

Application temperature

Polyethylene/ HMWPE

Standard plastics

–200 °C to 100 °C

Polyethylene/ UHMWPE

Standard plastics

–200 °C to 80 °C

Polypropylene/ PP-C

Standard plastics

up to 110 °C

Polyacetal/ POM-C

Engineering plastics

–60 °C to 100 °C

Polyetheretherketone/ PEEK

High-performance plastics

–60 °C to 250°C

Polyphenylene sulfide / PPS

High-performance plastics

–100 °C to 240°C

Polyethylene terephthalate/ PET

Engineering plastics

–100 °C to 110°C

Polyetherimide/ PEI

High-performance plastics

–70 °C to 180°C

Polyurethane/ PU

Polyurethanes

–50 °C to 80°C

Fluoroplastic (F4 РМ20, F4 К20)

Plastmass Group offers options for replacing obsolete material — fluoroplastic at favorable prices of the manufacturer. Fluoroplastic is a polymer containing fluorine atoms based on plastics. The polymer with four elementary particles, F4, is considered the most durable. One of its varieties is sheet fluoroplastic, also called Teflon and polytetrafluoroethylene. This material is used in construction, industrial sectors and other areas. However, our company offers materials that are better than fluoroplastic in their characteristics. From our wide range of materials, you can produce pulleys and rollers, bushings and liners, as well as elements of rolling and sliding bearings.

The properties and scope of application of Plastmass Group materials are identical to fluoroplastic

Materials from the Plastmass Group (polyacetal, polyethylene, polyethylene terephthalate, polyurethane, etc.) have the following properties, the presence of which allows the use of products in various industries:

  • The ability to absorb sounds, thanks to which the material is used in the production of silently working gears.

  • Corrosion resistance, safety for biological objects, as well as the inertia of caprolon when interacting with aggressive environments. These qualities allow the use plastic in the food industry. Our company's materials have Safety and Health Certificate and an international FDA certificate.

  • Excellent sliding properties, low coefficient of friction.

  • Very high wear resistance.

  • High viscosity even at low temperatures (up to -200°C).

  • High impact resistance.

We offer to replace fluoroplastic profitably

Plastmass Group offers to replace fluoroplastic with a material with better characteristics at attractive prices. Offering to buy the material for various purposes, including for use in the food industry, we guarantee the availability of sanitary conclusions. This document confirms the permissibility of material contact with food. In particular, the company has an international FDA certificate.


Materials for replacing fluoroplastic are available in the form of rods of various diameters or plates (sheets).


The cost of the material is determined based on its variety, place of production, as well as the size of the batch of purchased products. When ordering, it should be borne in mind that when the purchase amount exceeds 100 thousand rubles, wholesale prices come into effect.

bottom of page