top of page
Background

POLYACETAL

Polyacetal: replacement with polyethylene terephthalate INKUPET (PET, PETF), etc. from the manufacturer

PPS-Rods-with-Background.jpg
DSC01458-scaled.jpg
INKUPET-листы-1.jpg
PPS-Rods-with-Background.jpg
INKUPET-листы-1.jpg

Polyacetal replacement options: INKUPET

INKUPET Plastic Rods.jpg

INKUPET Rods

DIAMETER min. 6 mm

DIAMETER max. 200 mm

LENGTH 1000 - 3000 mm

INKUPET Plastic Tubes.jpg

INKUPET Tubes

OUTER DIAMETER min. 30 mm

OUTER DIAMETER max. 380 mm

LENGTH 1000 - 3000 mm

INKUPET Plastic Sheets.jpg

INKUPET Sheets

THICKNESS 2 - 100 mm

WITDH 1000 - 1250 mm

LENGTH 1000 - 3000 mm

AVAILABLE COLORS 

Black, other RAL colors on request

INKUPET - Operating Temperature

Our INKUPET (polyethylene terephthalate) is suitable for use in the temperature range from -60 to 110°C.

Properties and scope of INKUPET

INKUPET PET is a thermoplastic material based on polyethylene terephthalate (PET, PETF).
 

General chemical resistance:

  • In general, INKUPET PET is very resistant to aromatic and aliphatic hydrocarbons, insulating oil and grease.

  • It is not exposed to dilute acids, solutions of basic salts, saturated hydrocarbons.

  • Some polyatomic alcohols, esters and halogenated hydrocarbons cause slight swelling. The resulting plasticization does not lead to destruction.

  • INKUPET PET stands to almost all oils and coolant.

  • Mineral acids causes an oxidizing effect on INKUPET PET. INKUPET PET is soluble in concentrated alkaline solutions, phenols, cresols and other chemicals.

  • Room temperature water does not have any chemical or physical effects on INKUPET PET. INKUPET PET material almost does not absorb water (max. 0.3%), the absorbed water does not act as a plasticizer.

  • INKUPET PET is not resistant to prolonged exposure of hot steam, as it is susceptible to hydrolysis and gradually collapses.

bottom of page